sand41
The versatile and affordable 6-corrugation profile.
SAND 41, thanks to its unique geometry, is a roofing profile that represents the perfect combination of performance, aesthetics and affordability.
The corrugation pitch of 200 mm, assisted by a useful width of 1000 mm, allows this corrugated sheet to offer high performance in terms of load bearing capacity, and to be at the same time economically advantageous.
Thanks to the SANDdry system, the drainage gutter, studied to reduce the inconveniences linked to possible water infiltration, it guarantees that the water is brought in the eaves without infiltration, both in case of potential rising of the water for capillarity and of low slopes.
The coverage has a limited incidence of overlap, and its aesthetically pleasing appearance makes it an extremely versatile profile for both industrial and civil use.
The following applications are available on the internal side: SANDnodrip non-woven fabric with anti-condensation function, or SANDcontrolnon-woven fabric with anti-noise and anti-condensation function.
materials
materials
materials
materials
SANDnodrip - Anti-condensation cloth
SANDnodrip is a special non-woven fabric cloth chemically bonding specific elements that create a highly porous surface with excellent moisture absorption properties.
These characteristics prevent the roof from dripping, thanks to polyester fibres and microbeads in the felt that absorb and collect the forming condensation.
SANDnodrip corrugated metal sheets are characterised by a fire resistance class A2-s1, d0.
TECHNICAL INFORMATION about SANDnodrip:
- Material = TNT 100% polyester fibre
- Nominal thickness = < 1 mm
- Colour = grey
- Fire resistance class = A2 - s1, d0
The TESTS performed on the products are:
SANDcontrol - Anti-noise and anti-condensation cloth
SANDcontrol is a special non-woven cloth with increased density, which makes it possible to significantly reduce the noise caused by outdoor weathering.
In addition, it is specially designed to offer excellent performance in absorbing any condensation that may form.
The reduced thickness allows you to carry out interventions, even in case of recovery or renovation, without raising the roof package.
The corrugated sheets with SANDcontrol application are characterised by fire resistance class C-s1, d0.
TECHNICAL INFORMATION of SANDcontrol:
- Material: TNT 100% polyester fiber
- Nominal thickness = 2-3mm
- Nominal thickness= 200 g/m2
- Color = Grey
- Fire resistance class = C - s1, d0
The Tests performed on the products are:
learn moreFor variable bendings
Bending takes place by means of a series of transversal impressions to the trapezoidal sheet (notches) that produce a series of bends with constant/variable pitch.
The notches are designed and executed to allow a correct absorption of the material stresses due to deformation, without loss of rigidity of the trapezoidal element...
learn moreFor fixed radius bending
Micro impression calendering is a bending process that allows a controlled deformation of trapezoidal sheet metal until the desired radius of bending is obtained. Constant radius curved sheets are mainly used in the creation of curved roofing (on metal structures, prefabricated Y-shaped tiles, etc.).
Be...
learn more